Description
The Arka Inline TDS Meter measures and determines the Total Dissolved Solids (TDS) in water. The included ¼" connections enable use with standard reverse osmosis systems.
In addition to an LED screen displaying the measured TDS values, the device features a convenient status indicator with green, blue, and red lights. These signal water pollution:
- green: 0-50 ppm
- blue: 51-300 ppm
- red: > 300 ppm
Technical Specifications:
| TDS | 0-999 ppm |
| Accuracy | +/- 2% |
| Standby Power Loss | 100 uA |
| Power Consumption | 2.5 mA |
| Operating Temperature | 0-50 ℃ |
Assembly:
- Remove the blue safety rings from the adapters.
- Connect both adapters to the device and the hoses.
- Now, put the safety rings back in place.
Installation:
- Turn on the device by pressing the ON/OFF button.
- Open the water supply.
- The device starts measuring.
Note: The meter is NOT waterproof. Contact with water can cause a short circuit.
Questions frequentes
Informations specifiques
Specific References
- EAN13
- 4260735741333
- Reference :
- TDSIL
Avis clients
Programme fidelite
Cumulez des points a chaque commande et transformez-les en bons de reduction.
Plus vous achetez, plus vous economisez.